First glimpse of
1st Products

Share this story: Twitter | Facebook | LinkedIn

Reesink secures the exclusive UK distribution rights of American-based company 1st Products and will be bringing the versatile capsule range to SALTEX.

Reesink Turfcare has secured the exclusive UK distribution rights for a specialist range of tractor mounted aeration equipment from the American-based company 1st Products. The capsule collection will be on TYM stand F041.

Better ways to aerate and remove thatch to more efficient seeding, the versatile capsule range of 1st Products tractor attachments, which are available now, complement Reesink Turfcare’s growing range of tractor mounted attachments.

Steven Haynes, sales manager for TYM, which Reesink also distributes and which are a good fit with the 1st Products range, says: “We’re introducing three core product lines back into the UK from 1st Products, having been previously imported by Mumby Machinery.”

First in the range is the AERA-Vator, a subsurface aerator whose unique osilating vibrating tine system loosens, rather than punches, the soil around and underneath each tine. Allowing better air and water infiltration and easing soil compaction, the AERA-Vator does the job without leaving cores or plugs behind and means less post-aerification clean up. The AERA-Vator is also able to aerate dry soil to reduce the expense of pre-irrigating; in fact, the harder the soil, the better the AERA-Vator performs. The AERA-Vator can also be equipped with a unique seeding box, allowing the customer to aerate and seed in one pass.

The AERA-Vator has the additional benefit of being designed with a universal frame system, so extra shafts can be added to expand its capabilities. The shafts, available in conjunction with the AERA-Vator through Reesink Turfcare, are the Multi-Tine, Multi-Slicer, Multi-Spike and the non-PTO Coring shaft.

The big brother of the AERA-Vator, is the AGRI-Vator. A larger machine ideal for relieving soil compaction on bigger areas such as race courses and polo fields, the AGRI-Vator brings the same oscillating hubs as found on the smaller AERA-Vator, but with larger tines to provide more depth and subsoil fracturing. The tines create holes which are six inches deep and their aggressiveness can be varied by changing the PTO RPM and groundspeed.

The biggest advantage of the last item in the range – the VC Verti-Cutter – is the speed and depth which the machine can work to. Depth adjustments can be made in the field with no tools using a simple detent pin allowing the height to be adjusted in 5mm increments. It has a unique swing-hitch allowing for enhanced manoeuvrability around obstacles without the need for the operator to lift the unit and the pivot points in the hitch, as with all frame and shaft assemblies, allow the unit to turn and float over uneven terrain.