Fractional Series

The Otterbine Fractional five-in-one aerating system has the highest performance rate of any fractional aerator on the market and is efficient and cost effective to run. It’s also Otterbine’s best-selling aerator for maintaining water quality at healthy levels in small and medium-sized ponds. Choose form the Gemini, Phoenix, Rocket, High Volume and Mixer, for different spray heights, diameters, volumes or patterns.

 

The ideal solution for ponds less than three quarters of an acre in size, this all-in-one fountain and circulator provides quality aeration as well as an attractive display. It can easily convert between four aerating patterns and a horizontal circulator in just minutes!

  • Mixer

    Power 230/1/2.8 (voltage/phase/amp)
  • Rocket

    Spray height 3m
  • Spray diameter 40cm
  • Cubic meters p/hour (m3/hr) 41
  • Power 230/1/2.6 (voltage/phase/amp)
  • Phoenix

    Spray height Upper 2.8m, lower 1m
  • Spray diameter Upper 30cm, lower 3m
  • Cubic meters p/hour (m3/hr) 44
  • Power 230/1/2.6 (voltage/phase/amp)
  • High Volume

    Spray height 1m
  • Spray diameter 1.4m
  • Cubic meters p/hour (m3/hr) 99
  • Power (voltage/phase/amp) 230/1/2.8 (voltage/phase/amp)
  • Gemini

    Spray height 1.2m
  • Spray diameter 1.8m
  • Cubic meters p/hour (m3/hr) 115
  • Power 230/1/2.8 (voltage/phase/amp)

Features:

  • 1/2HP, single phase
  • Fractional series (quick disconnect pigtail)
  • Five chamber options in one unit - Gemini, Phoenix, Rocket, High Volume and Mixer
  • Ideal for smaller ponds of less than 1/2 acre
  • Corrosion resistant adjustable spray impellers/patterns to produce four spray patterns
  • Horizontal mixer (comes assembled as Gemini)
  • Rugged low visibility foam filled polyethylene float with recessed light pockets
  • Oil cooled, efficient 3250rpm custom built motor incorporates a silicon carbide single seal to ensure dependability and long life
  • Corrosion resistant, durable 18 gauge/316 grade stainless steel motor housing
  • Stainless steel brackets allow for easy conversion between aerating fountain patterns and mixer model
  • Adjustable discharge angle +/- 8 degrees (Mixer model only)

Say hello

Please complete the form below and we’ll get back to you soon, or call 01480 226948.