Machine Focus Toro Multi Pro 5800-D SPRAYING news lines . summer 2017 . 07 Product literature at reesinkturfcare.co.uk “Modern spraying at its best”, “simple to use and so accurate”, “undoubtedly the best piece of equipment I’ve bought”… these happy customers can only be talking about one thing: the Multi Pro 5800-D , the sprayer that is entering the fold as one of the Toro ‘greats’ – the machines that go down in history, such as the ProCore 648 and the Greensmaster 1000 , for being that good. The Multi Pro 5800-D, pictured left, has the power of a 36.5hp Kubota diesel engine to transport up to 300 gallons of chemicals and, if you opt for the large optional rinse tank kit, 30 gallons of fresh water too. That kind of capacity means a dramatic increase in productivity as chemical refill is far less often and you’ll be carrying three cycles worth of water at one time. Continual agitation of the tank contents means chemicals are always applied evenly at the optimum mixing point. While the optional Pro Control feature allows for precise calibration, responding instantly to the operator’s desired flow rate, consistently delivering it from start to stop, pass after pass. The boom can be enhanced with a boom shroud to minimise spray drift in windy conditions, which our links course customers find particularly beneficial, and to make sure nothing slows down operation there’s an optional fully-enclosed cab with air conditioning. Specification Engine 36.5hp Kubota diesel engine Ground speed Forward: 0-10mph. Reverse: 0-4mph Nozzle type Drift reduction Spray control Manual as standard, optional Pro Control Spray pump 6-diaphragm adjustable hydraulic drive Chemical tank capacity 300 gallon (1,136ltr) Standard boom (open): 6.1m Weight 2,882lbs (1,307kg) Dimensions with spray system Height: 1.46m. Length: 3.91m booms forward. Width: 1.75m booms forward Warranty 2-year limited warranty GeoLink The great Multi Pro 5800-D can be improved further still by add-ons like GeoLink, which uses GPS technology to automatically turn individual sprinklers on and off based on the machine’s exact location and the boundaries set. This option virtually eliminates waste and elevates the Multi Pro 5800-D’s accuracy levels from superior to unparalleled. Pro Control feature allows for precise calibration, responding instantly to the operator’s desired flow rate, consistently delivering it from start to stop, pass after pass.